Radicle Instrument Gas to Instrument Air Project Pool H
The purpose of the project is to quantify GHG emission reductions resulting from conversion of natural gas-powered devices to compressed air-powered devices in the oil and gas industry. Projects will greatly reduce pneumatic gas venting at multiple sites located in Alberta, where natural gas is used as the primary fuel gas. Site data will be aggregated for all subprojects for reporting purposes. Carbon offset credits are generated in accordance with the “Quantification Protocol for Greenhouse Gas Emission Reduction From Pneumatic Devices”, Version 2.1 (May 2020). This project achieves the highest possible accuracy by monitoring: • Volume of compressed air used in the project condition • Site-specific gas composition This enables Radicle to calculate the precise mass of methane that would have been vented had the conversion project not occurred. Subprojects fulfill all criteria listed in Section 1.2 “Protocol Scope” of the Quantification Protocol for Greenhouse Gas Emission Reduction From Pneumatic Devices Version 2.1 (May 2020).
Greenhouse Gas Emission Reductions from Pneumatic Devices
None defined
401 9 Ave SW Suite 1930
T2P 3C5
The following is a Google Maps feature that may not be accessible for all users. For assistance with location information, please contact: ghgregistries@csagroup.org 2022-03-18
2030-03-17
240,000
None Defined
Contact
,
View Project's address on Map